How to Make Precise Long Cuts with a Circular Saw Rip Guide
The rip saw guides might come with clamps or adhesion strips, which are vital in helping them grip on the workpiece. This guarantees your precise cuttings and reduces the chances of an accident.
It is the teeth that do the actual cutting rather than the blade. Still, to have a reasonable cut using the rip guide, you must set the blade properly, and you should set the correct depth. And while setting the depth, consider the thickness of the guide you are going to use.
To make precise cuts, follow the following tips:
Making Proper Adjustment
The right adjustment guarantees you the right cuts. Adjust both your saw and the rip guide. Use your user manual to get precise adjustments. However, the most frequent problem with the clamping on a straight edge of a guiding rail is that C clamps may obstruct the movement of the saw due to collision with the motor housing.
Keep Your Rip Clean
The ripping guide for circular saw needs to be well-maintained. After every use, you must clean it. When it is clean, definitely it will give you perfect ripping cuts. Virtually, using a clean rip guide guarantees you smooth cuts.
Position your Saw Properly
Ensure that the rip saw properly aligns with the line that you intend to cut through. Or you can align the edge of the Masonite with the cut line. Before you start the saw, ensure that the chord is out of the way.
Get an Even Cut by Getting the Right Measurement
When it’s time to set your rip saw guide, ensure that you get the correct measurements. Measurements must be precise. Get the right measurements when fixing the first part as well as when fitting clamps.
Rip Rail Alignments
If you want to make long cuts, properly align your rails. Rails without clamps and adhesive strips can result in crooked cuts. The rip guides tend to sways on the table. So clamping them is a must. You can use the connectors to ensure they are appropriately aligned.
A ripping guide for the circular saw is an essential component when it comes to ripping wood. These guides help you to make longer cuts without much hassle. However, to get the best cuts, you need to know how to set your saw and align it as well as adequately aligning your ripping guide.